Exterior water-based wood stain EWS032 – Dark Mahogany

Functions of Biomass exterior water-based wood stain:

1. Low TVOC
2. Water and chemicals resistance
3. Just need to be diluted with clean water
4. Easy to use for DIYers and professional painters
5. Suitable with both interior and exterior wooden projects

SKU: EWS032 Categories: EXTERIOR WATER-BASED WOOD COATING, EXTERIOR WB STAIN

Description

Products' information

Categories	Data
Specific Gravity at temperature 27-37°C	0.95 – 1.05 g/cm³
Solid Content(%)	15 – 17 %
Ph level	7.0 – 9.0
Viscosity: At temperature from 27 to 32°C and air humidity < 70%	9 – 15 secs cup F#4
Binder Type	Modified Polysiloxane

	Data
Application Method	Wipe/ Brush
Application Temperature	18°C – 40°C
Touch-dry Time (27°C)	30 – 45 mins
Hard-dry Time (27°C)	About 60 mins
Shelf life	6 months from date of manufacture. The date refers to product held in its original closed packaging.
Reservation in a cool ventilated room at temperature	5°C – 40°C with partial use, close container tight and use the remainder as soon as possible.
Theoretical Coverage (m2/Kg)	10 – 16 (Depends on the smoothness level of wood surface)
Preparation Instruction	Product surfaces must be clean, dry and flat, smooth not to stick to oil, grease, dirt. Sanding if necessary, then to wipe dust before spraying paint.
Coating System	Wiping 1 layers of exterior walnut color stain EWS032. After that can spray sealer/ satin color or satin clear with or without hardener.

Firm Properties	Result
Touch-dry Time	30 – 45 mins
Hard-dry Time	About 60 mins
Adhession	5B
Flexibility	≤ 2mm Mandrel
Impact	≥ 45cm
Hardness	HB

Controlled materials in the wet paint	Concentration
Aromatic Hydrocarbon	0 mg/kg
Halogenated Compound	0 mg/kg
Formaldehyde	0 mg/kg
Mercury	0 mg/kg
Lead	0 mg/kg
Cadmium	0 mg/kg
Chromium	0 mg/kg
Total Volatile Organic Content (TVOC)	< 130 g/L

Process instruction

error: Content is protected !!