BIOMASS COATING

PA COATING
WATER-BASED WOOD COATING
UV COATING
BAMBOO COATING
PIGMENTS & ADDITIVES
WB-coating-system-biomass

INTRODUCTION

Biomass premium water-based wood finish, expertly formulated to offer outstanding performance while adhering to the highest safety and environmental standards. Designed specifically for wood applications, this finish provides a superior coating with excellent durability and aesthetic appeal.

Our product is certified food-safe, making it appropriate for surfaces that may come into contact with food. It is also health-safe, ensuring it is suitable for environments where children are present. With a non-toxic composition, it reflects our commitment to providing a safe and eco-friendly solution.

Additionally, this finish proudly holds the Greenguard Gold certification, signifying low chemical emissions and suitability for indoor use. It also complies with CPSIA, IKEA, and WSI standards, affirming its alignment with rigorous safety and sustainability criteria. Choose our finish for a flawless, responsible solution that meets the highest industry benchmarks.

BIOMASS - cung cấp sơn gỗ gốc nước chất lượng

FEATURES OF PREMIUM WATER-BASED WOOD COATING

  •  Low VOC rate, Eco-friendly Wood Coating.
  • Certified the Gold Greenguard Gold Certificate for Clean & Green Coatings. 
  • Free of lead, heavy metals, and carcinogens, making it very safe for health
  • Low Odor
  • Non-Flammable
BIOMASS - cung cấp sơn gỗ gốc nước chất lượng

OUTSTANDING ADVANTAGES OF PREMIUM WATER-BASED WOOD COATING.

  • Quick drying
  • Good water resistance, UV resistance, and chemical resistance
  • Good scratch and abrasion resistance.
  • Excellent outdoor weather resistance (Exterior wood products) 
  • Low Consumption Rate
BIOMASS - cung cấp sơn gỗ gốc nước chất lượng

OUTSTANDING FUNCTIONS OF BIOMASS WOOD COATING.

  • Suitable for use on a wide variety of wood surfaces and different types of engineered wood, including MDF, particle board, plywood, laminate, melamine, and more.
  • Effective on interior & Exterior Wood Products

WATER-BASED WOOD COATING PROCEDURES





No. PAINTING PROCESS PRODUCT CODE APPLICATION METHOD MIXING INSTRUCTIONS MIXING RATIO DRYING TIME AT 27 – 37°C, HUMIDITY ≤ 70% NOTES
1 2K Water-based Clear Primer W1106 Spray Water-based Primer + Water-based Hardener (BW148.41-H) + Clean Water 100 : 8 : 5 90 Minutes Sand with #320 grit sandpaper
2 2K Water-based Clear Primer W1106 Spray Water-based Primer + Water-based Hardener (BW148.41-H) + Clean Water 100 : 8 : 5 90 Minutes Sand with #400 grit sandpaper
3 2K Water-based Clear Primer W1106 Spray Water-based Primer + Water-based Hardener (BW148.41-H) + Clean Water 100 : 8 : 5 90 Minutes Sand with #600 grit sandpaper
4 Color Spray Use undiluted 100 10 Minutes
5 2K Water-based Clear Gloss – 50 – 90 Sheen W1007 (10 – 50%) Spray Clear Gloss + Water-based Hardener BW148.41-H (148.H-46041) + Clean Water 100 : 12 : 5 90 Minutes Filter with #1800 mesh before use



Note:Use a mesh strainer (for base coats) and #1800 mesh (for the final topcoat) to filter the paint before use.
* Clean water used to dilute the paint in all steps should be drinkable or deionized water.
Results: Pinholing: 70% Hardness: Medium Clarity: Medium





No. PAINTING PROCESS PRODUCT CODE APPLICATION METHOD MIXING INSTRUCTIONS MIXING RATIO (%) DRYING TIME AT 27 – 37°C, HUMIDITY ≤ 70% NOTES
1 Water-based Color Filler Primer Wipe Use undiluted 100 90 Minutes Sand with #320 grit sandpaper
2 2K Water-based Clear Primer W1106 Spray Water-based Primer + Water-based Hardener (BW148.41-H) + Clean Water 100 : 8 : 5 90 Minutes Sand with #400 grit sandpaper
3 2K Water-based Clear Primer W1106 Spray Water-based Primer + Water-based Hardener (BW148.41-H) + Clean Water 100 : 8 : 5 90 Minutes Sand with #600 grit sandpaper
4 Color Spray Use undiluted 100 10 Minutes
5 2K Water-based Clear Gloss – 50 – 90 Sheen W1007 (10 – 50%) Spray Clear Gloss + Water-based Hardener BW148.41-H (148.H-46041) + Clean Water 100 : 12 : 5 90 Minutes Filter with #1800 mesh before use



Note:Use a mesh strainer (for base coats) and #1800 mesh (for the final topcoat) to filter the paint before use.
* Clean water used to dilute the paint in all steps should be drinkable or deionized water.
Results: Pinholing: 70% Hardness: Medium Clarity: Medium





No. PAINTING PROCESS PRODUCT CODE APPLICATION METHOD MIXING INSTRUCTIONS MIXING RATIO DRYING TIME AT 27 – 37°C, HUMIDITY ≤ 70% NOTES
1 2K Water-based Clear Primer W1106 Spray Water-based Primer + Water-based Hardener (BW148.41-H) + Clean Water 100 : 8 : 5 90 Minutes Sand with #400 grit sandpaper
2 2K Water-based Clear Primer W1106 Spray Water-based Primer + Water-based Hardener (BW148.41-H) + Clean Water 100 : 8 : 5 90 Minutes Sand with #600 grit sandpaper
3 Color Spray Use undiluted 100 10 Minutes
4 2K Water-based Clear Gloss – 50 – 90 Sheen W1007 (10 – 50%) Spray Clear Gloss + Water-based Hardener BW148.41-H (148.H-46041) + Clean Water 100 : 12 : 5 90 Minutes Filter with #1800 mesh before use



Note:Use a mesh strainer (for base coats) and #1800 mesh (for the final topcoat) to filter the paint before use.
* Clean water used to dilute the paint in all steps should be drinkable or deionized water.
Results: Pinholing: 70% Hardness: Medium Clarity: Medium





No. Painting Process Product Code Application Method Mixing Instructions Mixing Ratio (%) Drying Time at 25-35°C, Humidity < 85% Notes
1 Putty Filler W8045 Brush White putty + Water 100 : 10 60 minutes Edge treatment
2 Water-based 1K White Primer for Melamine W3314 + 1% Black Pigment Spray Use as is 100 60 minutes Sand with #400 grit
3 Water-based 2K Black Primer AH1103 + 2% Black Pigment Spray Black primer + Water-based hardener (BW148.41-H) + Clean water 100 : 3 : 3 60 minutes Sand with #400 grit
4 Water-based 2K Black Primer AH1103 + 2% Black Pigment Spray Black primer + Water-based hardener (BW148.41-H) + Clean water 100 : 3 : 3 60 minutes Lightly sand with #800 grit
5 Water-based 2K Clear Coat – Matte 50 – 90 W1007 (10 – 50%) Spray Clear coat + Water-based hardener (BW148.41-H) + Clean water 100 : 12 : 5 90 minutes Filter with #1800 mesh before use



Note:Use a mesh strainer (for base coats) and #1800 mesh (for the final topcoat) to filter the paint before use.

– Can be used for melanin ( except melanin coated have a smooth surface)
* Clean water used to dilute the paint in all steps should be drinkable or deionized water.





No. Painting Process Product Code Application Method Mixing Instructions Mixing Ratio (%) Drying Time at 25 – 35°C, Humidity < 85% Note
1 Putty Filling W8045 Brushing White putty + Water 100 : 10 60 minutes Edge treatment
2 Water-Based Black Primer 2K AH1103 + 2% Black Tint Spraying Black primer + Water-based hardener (BW148.41-H) + Clean water 100 : 3 : 3 60 minutes Sand with #400 grit
3 Water-Based Black Primer 2K AH1103 + 2% Black Tint Spraying Black primer + Water-based hardener (BW148.41-H) + Clean water 100 : 3 : 3 60 minutes Lightly sand with #800 grit
4 Water-Based Clear Topcoat 2K – Matte 50 – 90 W1007 (10 – 50%) Spraying Clear topcoat + Water-based hardener (BW148.41-H) + Clean water 100 : 12 : 5 90 minutes Filter with #1800 mesh before use



Note:Use a mesh strainer (for base coats) and #1800 mesh (for the final topcoat) to filter the paint before use.
* Clean water used to dilute the paint in all steps should be drinkable or deionized water.





No. Painting Process Product Code Application Method Mixing Instructions Mixing Ratio (%) Drying Time at 25 – 35°C, Humidity < 85% Note
1 Water-Based Black Primer 2K AH1103 + 2% Black Tint Spraying Black primer + Water-based hardener (BW148.41-H) + Clean water 100 : 3 : 3 60 minutes Sand with #400 grit
2 Water-Based Black Primer 2K AH1103 + 2% Black Tint Spraying Black primer + Water-based hardener (BW148.41-H) + Clean water 100 : 3 : 3 60 minutes Lightly sand with #800 grit
3 Water-Based Clear Topcoat 2K – Matte 50 – 90 W1007 (10 – 50%) Spraying Clear topcoat + Water-based hardener (BW148.41-H) + Clean water 100 : 12 : 5 90 minutes Filter with #1800 mesh before use



Note:Use a mesh strainer (for base coats) and #1800 mesh (for the final topcoat) to filter the paint before use.
* Clean water used to dilute the paint in all steps should be drinkable or deionized water.





No. Painting Process Product Code Application Method Mixing Instructions Mixing Ratio (%) Drying Time at 25 – 35°C, Humidity < 85% Note
1 Filler W8045 Filling Filler + Clean water 100 : 5 60 minutes Sand with #240 grit
2 Water-based Filler WF-3506 Wiping Water-based filler + Clean water 100 : 5 60 minutes Sand with #320 grit
3 Water-based Tannin Resistant Primer W1107 Spraying Primer + Water-based hardener (BW148.41-H) + Clean water 100 : 9 : 5 90 minutes Sand with #320 grit
4 Water-based White Primer 2K W1300 Spraying White primer + Water-based hardener (BW148.41-H) + Clean water 100 : 8 : 3 90 minutes Sand with #320 grit
5 Water-based White Topcoat 2K W1201 Spraying White topcoat + Water-based hardener (BW148.41-H) + Clean water 100 : 8 : 3 90 minutes Sand with #400 grit
6 Water-based White Topcoat 2K W1201 Spraying White topcoat + Water-based hardener (BW148.41-H) + Clean water 100 : 8 : 3 90 minutes Sand with #600 grit
7 Semi-Matte Water-based White Topcoat 2K W1007-25% + 5% W1201 Spraying White topcoat + Water-based hardener (BW148.41-H) + Clean water 100 : 12 : 5 90 minutes Filter with #1800 mesh before use



Note:Use a mesh strainer (for base coats) and #1800 mesh (for the final topcoat) to filter the paint before use.

  • Tannin wood including Teak, Acacia, Rubber, and Pine Wood

* Clean water used to dilute the paint in all steps should be drinkable or deionized water.





No. Painting Process Product Code Application Method Mixing Instructions Mixing Ratio (%) Drying Time at 25 – 35°C, Humidity < 85% Note
1 Filler W8045 Brushing White filler powder + Water 100 : 10 60 minutes Edge treatment
2 Water-based White Primer 1K for Melamine W3314 Spraying Use as is 100 60 minutes Sand with #400 grit
3 Water-based White Primer 1K for Melamine W3314 Spraying Use as is 100 60 minutes Sand with #600 grit
4 Water-based Clear Topcoat 2K – Matte 50 – 90 W1007 (10 – 50%) Spraying Clear topcoat + Water-based hardener (BW148.41-H) + Clean water 100 : 12 : 5 90 minutes Filter with #1800 mesh before use



Note:Use a mesh strainer (for base coats) and #1800 mesh (for the final topcoat) to filter the paint before use.

  • Can be used for Melanin ( except Melanin coated and coated surface )

* Clean water used to dilute the paint in all steps should be drinkable or deionized water.






Painting Process Table


No. Painting Process Product Code Application Method Mixing Instructions Mixing Ratio (%) Drying Time at 25 – 35°C, Humidity < 85% Note
1 Filler W8045 Brushing White filler powder + Water 100 : 10 60 minutes Edge treatment
2 Water-based White Primer 1K for Melamine W3314 Spraying Use as is 100 60 minutes Sand with #400 grit
3 Water-based White Primer 1K for Melamine W3314 Spraying Use as is 100 60 minutes Sand with #600 grit
4 Water-based Clear Topcoat 2K – Matte 50 – 90 W1007 (10 – 50%) Spraying Clear topcoat + Water-based hardener (BW148.41-H) + Clean water 100 : 12 : 5 90 minutes Filter with #1800 mesh before use



Note:Use a mesh strainer (for base coats) and #1800 mesh (for the final topcoat) to filter the paint before use.
* Clean water used to dilute the paint in all steps should be drinkable or deionized water.






Painting Process Table


No. Painting Process Product Code Application Method Mixing Instructions Mixing Ratio (%) Drying Time at 25 – 35°C, Humidity < 85% Note
1 Water-Based White Primer 2K for Adhesion AH1103 + 15% White Pigment Spraying White primer + Water-based hardener (BW.148.41-H) + Clean water 100 : 3 : 3 60 – 90 minutes Sand with #400 grit
2 Water-Based White Primer 2K for Adhesion AH1103 + 15% White Pigment Spraying White primer + Water-based hardener (BW.148.41-H) + Clean water 100 : 3 : 3 60 – 90 minutes Sand with #600 grit
3 Water-Based Clear Topcoat 2K – Matte 50 – 90 W1007 (10 – 50%) Spraying Clear topcoat + Water-based hardener (BW148.41-H) + Clean water 100 : 12 : 5 90 minutes Filter with #1800 mesh before use



Note:Use a mesh strainer (for base coats) and #1800 mesh (for the final topcoat) to filter the paint before use.
* Clean water used to dilute the paint in all steps should be drinkable or deionized water.