Sơn gỗ gốc nước trong nhà Biomass đẹp, bền, an toàn.

WB Clear Sealer 1K W5106

Sanding sealer W5106 is a water-based rapid single component Modified Polysiloxane Sealer formulated specially for application on timber substrate via spray application.

Self cross-linking, rapid curing
Outstanding water resistance
Excellent sanding ability
Excellent adhesion on substrates
Good resistance to UV irradiation
Outstanding ability to high-light wood-grain pattern (for transparent coating).

SKU: W5106 Categories: INTERIOR SEALER, INTERIOR WATER-BASED WOOD COATING

Description

Products' information

Categories	Data
Specific Gravity at temperature 27-37°C	1.0 – 1.1 g/cm³
Solid Content(%)	28 – 35 %
Ph level	7.0 – 9.0
Viscosity: At temperature from 27 to 37°C and air humidity ≤ 70%	50 – 60 secs cup Din#4
Binder Type	Modified Polysiloxane

	Data
Application Method	Spray
Application Temperature	18°C – 40°C
Touch-dry Time (27-37°C)	30 – 45 mins
Hard-dry Time (27-37°C)	About 60 mins
Shelf life	6 months from date to manufacture. The date refers to product held in its original closed packaging.
Reservation in a cool ventilated room at temperature	5°C – 40°C
Theoretical Coverage (m2/Kg)	10 – 16 (Depends on the smoothness level of wood surface)
Preparation Instruction	Product surfaces must be clean, dry and flat, smooth not to stick to oil, grease, dirt. Sanding if necessary, then to wipe dust before spraying paint.
Coating System	Spray 1-2 layers of sanding sealer, then spray 1-2 layers of topcoat with
Mixing Ratio	Ready to use. Should not be mixed with reducer/ clean & deionised water

Firm Properties	Result
Touch-dry Time	30 – 45 mins
Hard-dry Time	About 60 mins
Adhession	5B
Flexibility	≤ 2mm Mandrel
Impact	≥ 45cm
Hardness	HB

Controlled materials in the wet paint	Concentration
Aromatic Hydrocarbon	0 mg/kg
Halogenated Compound	0 mg/kg
Formaldehyde	0 mg/kg
Mercury	0 mg/kg
Lead	0 mg/kg
Cadmium	0 mg/kg
Chromium	0 mg/kg
Total Volatile Organic Content (TVOC)	< 130 g/L

error: Content is protected !!