Timber filler W8045

Categories	Data
Solid Content(%)	78 – 82%
Ph level	7.0 – 9.0
Viscosity: At temperature from 27 to 37°C and air humidity ≤ 70%	Can not measure
Binder Type	Modified Polysiloxane

	Data
Application Method	Plaster
Application Temperature	18°C – 40°C
Touch-dry Time (27-37°C)	30 – 45 mins
Hard-dry Time (27-37°C)	About 60 mins
Shelf life	6 months from date of manufacture
Reservation in a cool ventilated room at temperature	5°C – 40°C
Preparation Instruction	Product surfaces must be clean, dry and flat, smooth not to stick to oil, grease, dirt. Sanding if necessary, then to wipe dust before spraying paint.
Coating System	Apply putty to the defective area on the product surface.
Mixing Ratio	No need to mix with reducer

Controlled materials in the wet paint	Concentration
Aromatic Hydrocarbon	0 mg/kg
Halogenated Compound	0 mg/kg
Formaldehyde	0 mg/kg
Mercury	0 mg/kg
Lead	0 mg/kg
Cadmium	0 mg/kg
Chromium	0 mg/kg
Total Volatile Organic Content (TVOC)	< 130 g/L