Coating tutorial

Note: Use sock mesh (for sealer and stain) and #1800 mesh (for the final topcoat) to filter before using.

(*) Surface drying time under ambient conditions at a temperature of 27-37ºC and air humidity <70%.

(**) Clean water used for dilution must be potable water or ionized alkaline water.

(3): Water-based hardener (Shelf life after mixing with Stain: 2-3 hours).

Viscosity: Measured with cup No. 4, standard measurement in seconds (s).

Note: Use sock mesh (for sealer and stain) and #1800 mesh (for the final topcoat) to filter before using.

(*) Surface drying time under ambient conditions at a temperature of 27-37ºC and air humidity <70%.

(**) Clean water used for dilution must be potable water or ionized alkaline water.

(1): EQ Stain and Padstain depending on manufacturer instruction.

(2): PA hardener (Shelf life after mixing with Sealer & Stain: 4 hours).

Viscosity: Measured with cup No. 4, standard measurement in seconds (s).

Note: Use sock mesh (for sealer and stain) and #1800 mesh (for the final topcoat) to filter before using.

(*) Surface drying time under ambient conditions at a temperature of 27-37ºC and air humidity <70%.

(**) Clean water used for dilution must be potable water or ionized alkaline water.

(1): EQ Stain and Padstain depending on manufacturer instruction.

Viscosity: Measured with cup No. 4, standard measurement in seconds (s).