CLEAR SATIN W1005-HS

Categories	Data
Specific Gravity at temperature 27-37°C	1.0 – 1.1 g/cm³
Solid Content(%)	30 – 35 %
Ph level	7.0 – 9.0
Viscosity: At temperature from 27 to 37°C and air humidity ≤ 70%	50 – 65 secs cup F#4
Binder Type	Modified Polysiloxane

	Data
Application Method	Spray
Application Temperature	18°C – 40°C
Touch-dry Time (27-37°C)	15 – 20 mins
Hard-dry Time (27-37°C)	About 30 – 45 mins
Shelf life	6 months
Reservation in a cool ventilated room at temperature	5°C – 40°C
Theoretical Coverage (m2/Kg)	10 – 12 (Depends on the smoothness level of wood surface)
Preparation Instruction	Product surfaces must be clean, dry and flat, smooth not to stick to oil, grease, dirt. Sanding if necessary, then to wipe dust before spraying paint.
Coating System	Spray 1-2 layers of sanding sealer, then spray 1-2 layers of satin, then spray 1-2 layers metallic satin.
Mixing Ratio	Mix metallic with reducer W8044, after mixing with Satin W1005-HS

Controlled materials in the wet paint	Concentration
Aromatic Hydrocarbon	0 mg/kg
Halogenated Compound	0 mg/kg
Formaldehyde	0 mg/kg
Mercury	0 mg/kg
Lead	0 mg/kg
Cadmium	0 mg/kg
Chromium	0 mg/kg
Total Volatile Organic Content (TVOC)	< 130 g/L